[1]白继平,胡启祥.基于FLUIDSIM的“液压与气动”课程教学模式改革实践[J].南通航运职业技术学院学报,2018,(01):98-104.[doi:10.3969/j.issn.1671-9891.2018.01.025]
　BAI Ji-ping,HU Qi-xiang.Practice of Hydraulics and Pneumatics Course Teaching Mode Reform Based on FLUIDSIM[J].Journal of Nantong Vocational & Technical Shipping College,2018,(01):98-104.[doi:10.3969/j.issn.1671-9891.2018.01.025]
点击复制

基于FLUIDSIM的“液压与气动”课程教学模式改革实践()
分享到：

南通航运职业技术学院学报[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2018年01期
页码:
98-104
栏目:
高职教学
出版日期:
2018-03-25

文章信息/Info

Title:
Practice of Hydraulics and Pneumatics Course Teaching Mode Reform Based on FLUIDSIM
文章编号:
201801025
作者:
白继平; 胡启祥
浙江交通职业技术学院轨道交通学院
Author(s):
BAI Ji-ping;  HU Qi-xiang
School of Rail Transport, Zhejiang Institute of Communications;
关键词:
FLUIDSIM;  液压;  气动;  教学模式
Keywords:
FLUIDSIM;  Hydraulics;  Pneumatics;  Teaching mode
分类号:
G712;TH137-4;TH138-4
DOI:
10.3969/j.issn.1671-9891.2018.01.025
文献标志码:
A
摘要:
根据课程标准能力目标的要求, “液压与气动”课程的教学改革侧重于利用FLUIDSIM软件开发课程典型仿真控制回路, 形成课堂虚拟实践教学模式。新的课程教学模式改变了传统课堂教学只注重液压或气动知识传授的现象, 纠正了学生在课程实践教学过程中频繁出现搭建的液压或气动控制回路出错率高、电气回路与液压或气动回路不能协同工作等问题, 加深了学生对课堂教学内容的理解, 提升了学生专业知识的综合应用能力和工程实践动手能力。
Abstract:
According to the requirements of course competence targets, the teaching reform of the Hydraulics and Pneumatics course focuses on the use of FLUIDSIM software to develop typical simulation control loop to form classroom virtual practice teaching mode. The new classroom teaching mode changed the traditional classroom teaching mode which solely focused on imparting hydraulic or pneumatic knowledge, corrected the problems such as higher error rates which frequently occurred during the process of students’ practical teaching in building up hydraulic or pneumatic control loop and failure of synchronous work between electrical loop and hydraulic or pneumatic loop, and deepened students’ understanding of classroom teaching content, all of which promoted students’ comprehensive competence of application for their professional knowledge and engineering hands-on ability.

参考文献/References:

[1]韩京海.液压与气动应用技术[M].北京:电子工业出版社, 2014.
[2]贾光政, 王金东, 杨松山, 等.“液压与气动”实验教学模式的探讨[J].机床与液压, 2007, (2) :151-152.
[3]孟庆云.液压与气动实验教学改革与实践[J].液压与气动, 2011, (3) :17-19.
[4]毕长飞.Fluid SIM 3.6仿真软件在“液压与气动技术”中的应用[J].液压与气动, 2011, (8) :111-114.
[5]郭联金, 潘斌.Fluid SIM在液压与气动控制仿真实验中的应用[J].实验技术与管理, 2015, (8) :121-126.
[6]李生山.基于PLC和Fluid SIM软件的液压传动控制的设计[J].机械管理开发, 2014, (4) :42-44.

备注/Memo

备注/Memo:
收稿日期：2018-01-10
基金项目：浙江省高等教育教学改革项目 (JG2013259)
作者简介：白继平 (1976—) , 男, 山东济宁人, 浙江交通职业技术学院轨道交通学院教授, 博士。
更新日期/Last Update: 2018-05-24